Hysopt - Hydronic System Optimisation Logo

E-ACADEMY | 5 SESSIES | 3 MEI 2023

Hysopt e-Academy: Beheers warmte- en koude hydraulica

Bent u klaar om uw gebouwen toekomstbestendig te maken? Wilt u kosten besparen, de CO-uitstoot verlagen en het comfort van uw gebouwen optimaliseren? Schrijf u nu al in voor onze e-Academy over warmte en koude hydraulica en profiteer van onze "Early Bird" korting!

Hysopt E-Academy February 2021

Waarover gaat deze e-Academy?

Hysopt E-Academy icon

5 Live Virtuele Sessies

Onze e-Academy bestaat uit 5 virtuele live sessies waarin we ingaan op hoe u het rendement van uw verwarmings- en koelingsinstallaties kunt optimaliseren

Hysopt E-Academy icon 2

Toepassing van Hydronics

Tijdens de Academy zullen we ons meer richten op de toepassing van hydraulica dan op de theorie. We zullen de Hysopt Software gebruiken als didactisch hulpmiddel om u deze inhoud te brengen, maar de opleiding is geen software training op zich. 

Hysopt E-Academy Icon 3

Live Ondersteuning

Iedere theoriesessie zal gevolgd worden door een oefensessie waarbij u vragen kan stellen over de oefeningen. Deze sessies zijn optioneel en voornamelijk bedoeld voor diegenen die van plan zijn om hands-on met de Hysopt software aan de slag te gaan.

E-ACADEMY

Registreer je nu voor onze e-Academy

MAAK KENNIS MET JE TUTOR

Ruben Vos is Heat Network Specialist

Na praktijk ervaring te hebben opgedaan in het performance management van warmtenetten en de ontwikkeling van nieuwe warmtenetten in 2 grote energiebedrijven, richt Ruben Vos zich nu op Hysopt software binnen de warmtenetten sector. Ruben heeft een passie om bij te dragen tot de ontwikkeling van efficiënte en kosteneffectieve warmtenetten, alsook het verbeteren van de efficiëntie van bestaande warmtenetten.  

Ruben Vos Heating Specialist at Hysopt

Gedurende 5 sessies zal u leren uw hydraulica te optimaliseren. 

Tijdens iedere 2 uur durende sessie, zullen 1 of meer Hysopt specialisten spreken over de interessante wereld van hydraulica. U zal toegang verkrijgen tot een tijdelijke licensie van de Hysopt software, die als didactisch hulpmiddel gebruikt zal worden tijdens de e-Academy.  

01

Sessie 1 | 3 - 05 | 14:00-16:00 CET

Optimalisering van de warmteverdeling door een correct gebruik van de distributiecircuits en hydraulische balancering.  

OPTIONEEL: Oefensessie 05 - 05

02

Session 2 | 10 - 05 | 14:00-16:00 CET

Optimaliseren van bestaande verwarmingsinstallaties.

OPTIONEEL: Oefensessie 12 - 05

03

Sessie 3 | 17 - 05 | 14:00-16:00 CET

Hybride installaties ontwerpen met WKK en ketel: benut het volledige potentieel van een WKK voor uw verwarmingsinstallatie.

OPTIONEEL: Oefensessie 22 - 05

04

Sessie 4 | 24 - 05 | 14:00-16:00 CET

Ontwerpen van hybride technische ruimtes met warmtepompen en ketels, optimaliseren van laagwaardige en hoogwaardige warmte.  

OPTIONEEL: Oefensessie 26 - 05

05

Sessie 5 | 31 - 05 | 14:00-16:00 CET

De juiste keuzes maken bij het ontwerpen van warmtenetten en collectieve verwarmingssystemen met HIU's.

OPTIONEEL: Oefensessie 02 - 06

Wilt u graag meer weten over elke sessie?

Onze alumni aan het woord

Elliot Miles Testimony about Hysopt e-Academy

Ik had het genoegen om een 5-delige cursus te volgen die mij persoonlijk, en SWEP als bedrijf, in staat heeft gesteld om een beter begrip te krijgen van de hydronische uitdagingen waarmee ontwerpers van verwarmings- en koelingsnetwerken geconfronteerd worden."

- Elliot Miles | Lead Business Engineer at SWEP

Peter Grondelaers testimonial about Hysopt e-Academy

Tijdens deze cursus heb ik geleerd hoe belangrijk hydraulische optimalisatie van verwarmings- en koelingsinstallaties is om de energiekosten te verlagen, CO-uitstoot te reduceren en het comfort van gebouwen te optimaliseren."

- Peter Grondelaers | Sustainability Engineer

Carlos Rodriguez testimonial about Hysopt e-Academy

"Ik was onder de indruk van de cursusinhoud en de Hysopt-software. Ik kijk ernaar uit om de software toe te passen bij een volgend project!"

- Carlos Rodriguez | Principal Engineer at Ramboll

E-ACADEMY | 5 SESSIES | VANAF 3 MEI 2023

Registreer nu voor de e-Academy!

  • 5 live sessies van 2 uur met live support en ruimte voor Q&A
  • Hysopt licentie voor didactische doeleinden tijdens de duur van de sessies. De licentie blijft geldig tot 3 weken na de laatste sessie.
  • Extra oefeningen als 'huiswerk'
  • Ondersteuning van Hysopt consultants om je verder te helpen met de oefeningen en andere vragen gerelateerd aan het onderwerp van de sessie.
  • U ontvangt een certificaat aan het einde van de e-Academy.
  • Vlaamse deelnemers kunnen profiteren van een additionele korting via KMO Portefeuille.
  • Referentie nummer: DV.O218486
  • Partners ontvangen 50% korting op de e-Academy.
  • "Early Bird" korting tot en met 14 april

€1300 voor 5 sessies

Overzicht van de Theoretische Sessies

SESSION 1 |

Optimising heat distribution by choosing the correct hydraulic configuration

Session 1 will focus on the distribution of heat and how the hydraulic configuration of this distribution system will impact the performance of the system. It’s easy to get excited about hybrid plantrooms with low carbon heat sources and smart control systems but none of the anticipated decarbonisation will be achieved if the basics of the installation are incorrect. Whilst this might seem elementary to most M&E designers, we still see a poor hydraulic configuration on most of the projects we get involved in. Getting this right should always be the first step in the decarbonisation of the heating and cooling installation and offers the best return on investment.

  • Propagation of power, flow and temperatures
  • Hydraulic Distribution CircuitsDiverting, mixing and throttleCombined hydraulic circuitsActive vs passiveLow loss header
  • Case study

SESSION 2 |

Unlocking the potential of heating installations in existing buildings (Technical/Advanced)

In the race towards net-zero buildings, we should not forget the existing building stock. In this session we will dive into lots of marginal gains to be made in close-to-all existing installations. All this to make better use of the existing assets which might still be good enough for another 10-20 years of reliable service and make them ready to adopt low-carbon heat sources. This will be the most applied session so you will take lots of key learnings with you for your next project.

  • Solving hydraulic incompatibilities and hydraulic balancing
  • Converting constant flow to variable flow
  • Saving pumping energy
  • Decreasing temperature regimes using legacy oversizing
  • Case study

SESSION 3 |

Designing hybrid plantrooms with CHP and boiler: unwrapping the full potential of a CHP for your heating installation (Conceptual/Advanced)

Having optimised many CHP installations with the Hysopt software, we want to spread this knowledge to the sector as we feel there are lots more CHP installation still to be optimised. Whilst CHP is only a transition technology towards a net-zero buildings, it would be a shame not to get the most out of these assets.

  • Combined heat and power
  • CHP sizing with duration curves
  • Hydraulic integration of CHP with boilers
  • Sensitivity analysis for thermal store sizing
  • Case study

SESSION 4 |

Designing hybrid plantrooms with heat pumps and boilers, optimising low-grade and high-grade heat (Conceptual/Advanced)

This session will discuss the use of low temperature heat sources with heat pumps for heating and hot water. More importantly, we will discuss how to integrate these low temperature heat sources in new and existing systems and get the optimal performance from these. We notice that most heat pumps are integrated similarly to a gas boiler or CHP, applying old concepts of integrating high temperature heat sources. A correct hydraulic integration can make the difference in receiving cost-effective heat from the heat pump and expensive heat or no heat at all.

  • Utilising environmental and waste heat for space heating and hot water
  • Heat pump technology
  • Hydraulic integration of HP with boilers
  • Sensitivity analysis for thermal store sizing
  • Combining high and low temperature heat distribution
  • Lowering distribution temperatures in existing buildings: repurposing oversizing
  • Case study

SESSION 5 |

Making the right choices when designing heat networks and communal heating systems with HIU’s (Conceptual/Advanced)

A collective approach for heating residential homes often makes sense to put waste heat to a good use and deploy other low carbon heat sources. A common solution here is to distribute the heat throughout a heat network feeding HIU’s in these homes.

During this session we will explain how designing an HIU system is different to a traditional heating system. We will touch upon the basics as well as a couple of small but important details which can make or break the performance of such a system.

  • Designing a heat networkFlow rate calculation with diversified demandsPipe sizing of risers, laterals and underground pipes
  • Heat interface unitsDirect vs indirect HIUKeep warm functionBalancing HIU systems
  • Good practice vs best practice
  • 3rd, 4th and 5th generation heat networks
  • Case study

FAQs

Wat als ik niet kan deelnemen aan een bepaalde sessie?

We versturen je telkens de opname van elke sessie. Zo kan je de sessies bekijken waar en wanneer je maar wil.

Ontvang ik een certificaat na het voltooien van de cursus?

Ja, we sturen je een certificaat na het voltooien van de e-academy. Dit certificaat bevestigt dat u de cursus heeft afgerond en de ins en outs van hydraulica volledig begrijpt.

In welke taal wordt de e-Academy gegeven?

Alle 5 sessies worden gepresenteerd in het Engels. Bijkomende vragen kunnen gesteld worden in zowel het Nederlands, alsook het Engels.

Hoe vraag ik KMO portefeuille aan?

U kunt de Vlaamse KMO Portefeuille subsidie aanvragen via de vlaio website. Ons Hysopt referentie nummer is DV.O2184786

Ik heb een specifieke vraag over de e-Academy of Hysopt.

Voor specifieke vragen over de inhoud van de e-Academy kan je terecht bij jouw tutor, Ruben Vos via ruben@hysopt.com. Voor specifieke vragen omtrent Hysopt en het gebruik van Hysopt software in projecten, kan je contact opnemen via sales@hysopt.com.